5300-M Medium Series Bearing. 75mm ID. 160mm OD.
Product Description
Made by: MRC Bearing Service
Part# 5315MFF
Item# 4510742
Specifications:
Inch/Metric: Metric bore
Bore Type: Round Bore
I.D.: 75 mm
O.D.: 160 mm
Width: 2-11/16 in
Enclosure: Double Shielded
Rows of Balls: Double
Material: Steel
O.D. Type: Straight
Bearing Type: Angular Contact
Precision: Standard
Radial Internal Clearance Spec.: Normal Clearance
Ball Material: Steel
Cage Type: Metal
Capacity: Maximum Capacity
Contact Angle: 30*
Outer Ring Width: 2-11/16 in
Precision Level: Standard ( ABEC 1)
Preload Level: None
Seal Material: Metal
Seal Type: Non-Contact Seals
Dynamic Load Rating: 42000.00 lbf
Static Load Rating ( Max): 46800.00 lbf
Cage Material: Steel
Fillet Radius: 2.000 mm
Inner Ring Width: 2-11/16 in
Limiting Speed Grease: 2600 rpm
Limiting Speed Oil: 3600 rpm
Limiting Speed Sealed: 2600 rpm
Locking Device: None
Lubricant: Chevron SRI-2
No. in Set: Single Bearing
Radial Internal Clearance: Normal
Snap Ring: None
Temp. Range ( Min ): -22*F
Temp. Range ( Max): 250*F
Applications:
Used with heavy radial loads, two-direction thrust loads or a combination of both.
Features:
Has filling notches on one side to permit assembling the maximum number of balls into the bearing.
Contact angles converge outside the bearing.
All inner and outer rings have closure grooves.
Bearings may be equipped with seals, shields, snap-rings or any combination.
Has very heavy radial capacity
Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction.
One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring.
Part# 5315MFF
Item# 4510742
Specifications:
Inch/Metric: Metric bore
Bore Type: Round Bore
I.D.: 75 mm
O.D.: 160 mm
Width: 2-11/16 in
Enclosure: Double Shielded
Rows of Balls: Double
Material: Steel
O.D. Type: Straight
Bearing Type: Angular Contact
Precision: Standard
Radial Internal Clearance Spec.: Normal Clearance
Ball Material: Steel
Cage Type: Metal
Capacity: Maximum Capacity
Contact Angle: 30*
Outer Ring Width: 2-11/16 in
Precision Level: Standard ( ABEC 1)
Preload Level: None
Seal Material: Metal
Seal Type: Non-Contact Seals
Dynamic Load Rating: 42000.00 lbf
Static Load Rating ( Max): 46800.00 lbf
Cage Material: Steel
Fillet Radius: 2.000 mm
Inner Ring Width: 2-11/16 in
Limiting Speed Grease: 2600 rpm
Limiting Speed Oil: 3600 rpm
Limiting Speed Sealed: 2600 rpm
Locking Device: None
Lubricant: Chevron SRI-2
No. in Set: Single Bearing
Radial Internal Clearance: Normal
Snap Ring: None
Temp. Range ( Min ): -22*F
Temp. Range ( Max): 250*F
Applications:
Used with heavy radial loads, two-direction thrust loads or a combination of both.
Features:
Has filling notches on one side to permit assembling the maximum number of balls into the bearing.
Contact angles converge outside the bearing.
All inner and outer rings have closure grooves.
Bearings may be equipped with seals, shields, snap-rings or any combination.
Has very heavy radial capacity
Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction.
One-piece, heat-treated steel for maximum retention; snapped into place after the full quota of balls has been introduced between the inner and outer ring.
